Hướng dẫn mở khóa Bios cho tất cả các dòng máy #Tecra, #Satellite , #Portege , #Satellite, #Qosmio
#Unlock #Toshiba #Tecra, #Satellite , #Portege , #Satellite, #Qosmio #bios #Password
My Skype : haisung4344 - My Skype : haisung4344 - My Skype : haisung4344
1. Switch on the notebook, when the boot logo appears press [F2].
Mở nguồn laptop khi xuất hiện logo toshiba bấm phím F2 , màn hình sẽ hiện ra dòng Password yêu cầu nhập password
______ “Password=' will be display.
#Unlock #Toshiba #Tecra, #Satellite , #Portege , #Satellite, #Qosmio #bios #Password
My Skype : haisung4344 - My Skype : haisung4344 - My Skype : haisung4344
1. Switch on the notebook, when the boot logo appears press [F2].
Mở nguồn laptop khi xuất hiện logo toshiba bấm phím F2 , màn hình sẽ hiện ra dòng Password yêu cầu nhập password
______ “Password=' will be display.
2. Press keys in the order [CTRL], [TAB], [CTRL] and [ENTER].
Lần lượt nhấn Ctrl tiếp theo là Tab và Ctrl và Enter từng phím , từng phím một .Màn hình sẽ xuất hiện Pc serial No , Challenge Code và Response code = .........
______The Serial number and Challenge code will be displayed.
Please Note:
______For some reasons it could happen that no PC Serial No. and Challenge Code will displayed instead of "Not Certified" appears. In this case remove the AC-adapter and the battery for a short time and try it again.
Nếu không xuất hiện được như trên thì chúng ta ngắt kết nối dây sạc và pin một thời gian ngắn và cố gắng lại lần nữa
3. Please make the payment below or contact me
My Skype : haisung4344
* VERY IMPORTANT
_____Do not power off the computer once you provide us with a Response code. There’s a unique Response code .
Don’t turn off your notebook, don’t restart it, don’t enter anything except generated Response code.
Quảng cáo
* Không tắt laptop , không khởi động lại , một khi đã cung cấp Response code đến cho chúng tôi và đó là Response code duy nhất
4. You will receive the "Response code".
• Enter the Response code (do not mix up "0" and "O" or "C" and "G" or "8" and "B")
Đừng lẫn lộn giữa O và số 0 , C và G , số 8 và B
5. Press [ENTER] key .The " TOSHIBA Setup Utility " (BIOS) appears.
(if your laptop reboot press immediately F2 holding down to enter bios setup utility)
Quảng cáo
Bấm Enter để kết thúc .Laptop sẽ xuất hiện TOSHIBA Setup Utility
6. Press [F2] key to enter Toshiba setup utility
• Go to the " Securtiy " tab by pressing the cursor right key [->].
• Check if the line “ Supervisor Password Registered ” or “ User Password Registered ” is marked.
Di chuyển đến Security và kiểm tra xem Surpervisor và User có được đánh dấu ?
Press [ENTER]. Nhấn Enter
Press [Space bar]. Nhấn phím Space
Press [ENTER] first time. Enter lấn thứ 1
Press [ENTER] second time. Enter lần 2
Press [ENTER] third time. Lần 3
• The User Password is set to " Not Registered ".
• Press [F10] key to save the changes and confirm this by pressing the [Y] key.
• The BIOS Password is deleted
User hiện 'không đăng ký' , Bấm F10 để lưu lại cấu hình và laptop đã được mở khóa thành công