Hướng dẫn chọn cấu hình PC cho MAC OSX, đặc biệt cho phiên bản 10.6

AiPhone
30/6/2008 2:57Phản hồi: 7
Mình đang rất muốn có bộ PC để chạy MAC OSX nhưng chưa biết phải chọn cấu hình PC thế nào cho tốt nhất. Mình đang cần các phần mềm chạy design trên MAC.
Budget của mình tầm 1000$, không kể LCD.
Mình rất mong các bạn tư vấn.
Mình cũng rất thích iMAC, nhưng giá cao, cũng hy vọng chạy trên nền PC với cấu hình cao sẽ cho hiệu năng cao hơn.

Cảm ơn các Bác.
7 bình luận
Chia sẻ

Xu hướng

10.6 còn là develope đã ra đâu mà biết đc cấu hình ntn thì chạy ngon, đến máy apple chính hiệu còn chạy lủng củng huống chi pc ?
nếu bạn định lắp pc mac thì mình nghĩ nên lắp đủ đẻ chạy 10.5 là tốt rồi, 10.6 1 năm nữa mới ra, chưa kể thời gian để hack cho nó chay trên pc, nhanh cũng 6 tháng sau bản trên pc mới ổn định 😁
Cảm ơn bạn.
Hì hì, mình muốn cho tương lai ý mà.
Rất mong các bạn chia sẻ để chạy tốt trên 10.5.x là OK lém roài...
datdiep
ĐẠI BÀNG
17 năm
chạy bộ Kaliway hoặc Leo4allv3 cho PC là oki
_ kaliway : (cho con AMD, up lên 10.5.3 hình như có hỗ trợ Intel)
graphics_Drivers

Ati_Radeon

X1000Series
ATYinject for 19xx series
NATIT_For_X1000_series
ATIRadeonX1000SeriesGraphics
1950gt_pro

X2000_HD_and_X3000_HD_Series
NATIT_For_X2000_X3000_Series
HD2900xt_pro
white_menus_fixe_HD2600_pro
white_menus_fixe_HD3850_3870x2
ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix)
ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix)

Nvidia_Geforce (select one only)

NVinject
NVinject-128
NVinject-256
NVinject-320
NVinject-512
NVinject-640
NVinject-768
NVinjectGO
NVinjectGO-512
NVInject_Clevo_M570RU 8700gfx
NATIT_gfnvidia
Intel_GMA

GMA950 (tiger one full accelerated and resolution support but with mouse artifact)
GMAX3100 (not tested)


Audio_Drivers

Intel NVIDIA VIA ATI HDAudioController
NVIDIAAC97Audio
Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support)
ALC883_DS3,p5k pro etc...
alc889a_shutdown_support
ALC882_p5w_dh_deluxe
sigmatel_9200_inspiron_9400




Networks_Drivers

Networks_Cards

AppleBCM440XEthernet
AppleBCM5751Ethernet
AppleRTL8169Ethernet
MarvellNetworkAdapter
RealtekR1000
skge_marvell
forcedeth

Wifi_Card

IO80211Family
AtherosWirelessAdapter
Zydas-ZD1211-1215
wifi_Broadcom_airport
RT2500-RT73-USB
wifi_AP_Realtek_RTL8187L
wifi_Realtek_RTL8187B
iwi2200beta


Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron)

AppleNForceATA
AppleOnboardPCATA
AppleVIAATA
AppleGenericPCATA
SiliconImage3132




Thirds_Applications (will be installed in /applications/KOOLSOFTS/)

adium
archives
candybar
changeFinder
colloquy
fairmount
Growl
GmailNotifier
kextHelperB7
onyx
Iphoto
macam_iusbcam
MacTheRipper
Mojo
Proxi
pacifist
perian
ppfomatic
SimplyBurns
solarseek
stuffitExpander
textmate
transmission
vlc
xbench


Patches

Hardcoded_SMBIOS

Lastnetkassmbios (with coreplayer fix , mozzy and logmein !)

AppleSMBIOS-27-Default
AppleSMBIOS-27-667
AppleSMBIOS-27-800
AppleSMBIOS-27-1066
AppleSMBIOS-27-DDR3-1333
AppleSMBIOS-27-IM
AppleSMBIOS-27-MB
AppleSMBIOS-27-MBMem
AppleSMBIOS-27-MP

OLD tiger SMBIOS_1.0.1

SSE2_Jas1048_ACPI_APIC (may or not work)

AppleACPIPlatform
AppleAPIC

Others PATCHES

cpus=1 flag
Francais_pc_keyboard_layout
TimeMachineFix
PowerManagement_bundle (don't install it if you have select sse2 patch !!!)
IntelMemoryController
USBPCGen (fix usbehci detection problem , enable usb2)


AMD_1052_Patches (select patch 1 or patch 2)

AMD_1052_Patch_test_1
AMD_1052_Patch_test_2
-legacy flag
_ Leo4allv3 : (có cả AMD và Intel)
AppleSMBIOS:

I put in lots of choices for different versions based on bus speed if you want it to show your proper memory speed, or if you want your hack to look like a real mac. The default install if nothing is selected is Netkas improved version 27.
Options are:
DDR667
DDR800
DDR1066
DDR1333
iMac
MacBook
MacPro

Kernel:

I have added Netkas 9.2.0 sleep kernel, and 9.2.2 binpatched kernel ny Modbin(Be warned this does not work on all AMD machines! SSE3 CPU is required!). The default install is still Netkas 9.2.0 speedstep kernel. There are also the Stock kernels(vanilla) 9.2.0/9.2.2

RemoveFireWire:

For those that have issues with FireWire, or those that just want to speed their boot time a little. This moves all of the IOFireWire kext\'s to /FireWire folder in the root of your install drive.

About This Mac:

This is my own little installer to customize \"About this Mac\" with your processor info. No it does not fix memory speed, you have to do that with AppleSMBIOS. It should work for all languages and should report overclocked CPU\'s properly.

Power Management:

By popular demand I added the laptop power management bundle to the install. You will still need to set it up in system preferences. This is known to have a few minor bugs. It may not report the proper time remaining or any time remaining for that matter, so use at your own risk. If you select this please do not select an ACPIPlatform, as this requires version 1.1.0.

AMD System Fix:

You will notice it is checked and greyed out by default. To take out alot of user error (people forgetting to check it for their AMD systems) I have added a script to detect the CPU and patch accordingly. When its running it will echo your processor information in the install log (if you show all). It will then skip the patch process if your on Intel or patch if its an AMD. I hope it works well for everyone!

Bootloader:

This option is checked and greyed out by default. It is Dense\'s script to install EFI and make the partition active. If you already have an existing bootloader (like from Vista) on the same logical drive it will not overwrite it. It will however flag the partition you installed to active, so you will have to manually set your Windows partition active again if needed.

Chipset Drivers:

(NOTE- JMicron is the only driver that always installs so please choose at least 1 option, some will have to choose 2 [if you have Marvell IDE and Intel SATA for example] ) There are only 6 choices here.

Nforce Old - This is the older version of Medevils Nforce(1.0.2) driver. Install this if you have issues with SATA enabled causing a panic. Known to work for some Nforce3 users.

Nforce Test- If you have a SATA DVD or do not have issues booting the DVD normally choose the NforceTest.

SiliconImage3132 - I have not found anyone that uses this specific chipset to confirm if it works.

VIA, SiS, Marvell and SB - Please install this if you are using any of these chipsets. If you have a Marvell IDE drive please install this as they should be supported. I have added many ID\'s here so I hope they all work! This chioce installs AppleVIAATA, AppleOnboardPCATA and AppleGenericPCATA. Confirmed working for SiS!

SAS - By request I added support for this, as of my writing this its untested. Hopefully it works.

Intel ICHx- If you have ICH7/8/9 chipsets you should install this. This is the modified version by -Dune- to support more than 2 drives and fix the over 2Gigs of RAM panics.

Audio:

These choices have not changed much, only added support for STAC9271 by request. If your not sure what chipset you have, please choose AzaliaAudio(for most HD) or AC97Audio.
Chioces are:
ALC850/882/883/888/889
AC97Audio
ADI1988
STAC9271
AzaliaAudio

Graphics Drivers:

I have updated many of these packages.
ATI- there are options for:
3850
3870
2600XT(PCIE)
2600XT(AGP)
3870X2
2600PRO(PCIE)
2600PRO(AGP)
X1600(PCIE)
X1600(AGP)
X19X0
X1400 Mobility

Nvidia- I have updated the drivers to the latest available from the Mac Pro\'s and editied to include all Device ID\'s I could verify. This should cover mostly all 6XXX/7XXX/8XXX series cards.
NVinject- By request I have added options for different version of Nvinject(0.1.3/0.2.0/0.2.1). If your not sure choose version 0.2.1 with the proper amount of RAM your video card.
GMA950 - QE/CI+resolution change with some artifacts
GMA950 - No Aritfacts QE/CI but no resolution.
GMAX3100 - suppose to give QE/CI(confirmed for device ID 0x2a02)

Network Drivers:

ForceDeth- This is compatible with most Nforce LAN.
ForceDeth-V - This is compatible with most Nforce LAN(recommended version)
Skge - Driver for most Marvell LAN cards.
RTL8187- Just as it says for Realtek 8187
Zydas USB- For the USB Wireless LAN adapter
Tiger IO80211- Some Atheros cards require this Tiger version to work. Default install is IO80211 from 10.5.2
Broadcom- WLAN driver for BCM4306/4309/4318/4320/4324
RT2500- Suppose to support Dlink WMP54G v4.0, may support some others.
ViaRhine- Just as it says, for ViaRhine chipsets
Intel 100Pro VE- Just as it says, for the Intel 100Pro VE chipset
RT2860- Driver for some chipsets like WL-181, may also work on some others.

Good Applications:

You can choose to install or not, but I do recommend many of these useful programs. They include:
Adium
AppZapper
BBEdit
CandyBar
Colloquy
FireFox
Gumby 50c
Invisibles
KCNScrew
KextHelper
Marvin\'s AMD Utility
MD5
Pacifist
PackageMaker version 2.1(old harder to find)
Stuffit Expander
Textmate
Transmission
TubeSock
Unison
VLC
Xbench
to: bác datdiep

Người ta hổng biết mới nhờ tư vấn giúp đở, bác bỏ vào một đống như thế nhìn là đau cả đầu tối cả mặt huông chi là hiểu được cái đông bui nhùi của bác là gì:no6xn:

Lần sau bác nên đọc kỷ nội dung của chủ topic rồi hẳn trả lời nhé...:angry6wn:


To: Bác Chủ topic

Theo em thì bác nên kiếm thêm đạn lượm một em imac hay 1 em macbook pro 2hand thì hay hơn. Tuy PC đã cài được mac nhưng việc tìm kiếm driver là một chuyện khó khó lém bác ơi. Với giá tằm khoảng $1000 của bác thì đủ để chạy Vista hay có thể Mac os 10.5. Nếu bác muốn để cho tương lại sử dụng 10.6 thì bác nên để tiền tới khi nào 10.6 có bản hack cho PC rôi hẳn mua máy :rolleyes5cz:

Chúc bác vui
datdiep
ĐẠI BÀNG
17 năm
😁 sorry bác và bác chủ hé....chưa lọc ra kịp :sad9cd:
theo e thấy thì với ý của bác chủ thì bác muốn sử dụng Win là chính Mac là fụ thôi (vì chỉ cần dùng 1 số Soft), và với số tiền 1000$ thì muốn có cái MAC mới k đủ nên chì còn giải fáp dùng PC (new 100%) chạy MAC, nếu mua iMAC chạy Win ( chưa thử, chắc chạy đc :D ) thì hơi uổng.
đành dùng MAC OSX86 là hợp lý nhất, còn nếu bác k ngại Second hand thì dùng MAC cho nó Sysnch.
vài lời tâm tình, ý lộn chia sẽ cùng các bác
tầm 1000$ mà chưa kễ LCD thì với ngân sách đó bác có dc 1 con iMac khá ngon rồi, vừa đẹp vừa phù hợp nhu cầu design
Cảm ơn các bác đã chia sẻ, góp ý. Mình sẽ cố gắng tổng hợp và khi nào hoàn thiện sẽ báo cáo các bác.

Chân thành cảm ơn....

Xu hướng

Bài mới








  • Chịu trách nhiệm nội dung: Trần Mạnh Hiệp
  • © 2025 Công ty Cổ phần MXH Tinh Tế
  • Địa chỉ: Số 70 Bà Huyện Thanh Quan, P. Võ Thị Sáu, Quận 3, TPHCM
  • Số điện thoại: 02822460095
  • MST: 0313255119
  • Giấy phép thiết lập MXH số 11/GP-BTTTT, Ký ngày: 08/01/2019