Lenovo A5000 - Stock rom by SPflashtool

http://1.bp.blogspot.com/-anQKD2vlGbc/Va-bZCIM49I/AAAAAAAABNk/CEFjpouj0dg/s320/Lenovo+A5000.jpg
http://1.bp.blogspot.com/-anQKD2vlGbc/Va-bZCIM49I/AAAAAAAABNk/CEFjpouj0dg/s320/Lenovo+A5000.jpg




I already examined this firmware and it’s absolutely running.




A few footage beneath are simply an instance of my earlier publish. Exchange scatter record with the right kind firmware that you simply downloaded.

You’ll be able to repair the next factor on your telephone:
1. Bootloop
2. Broken Gadget UI
3. TP Improve handiest
four. Lifeless telephone however it’s detected in pc
five. Eliminate Gmail Account / Password / Trend Lock (Choice Approach)
6. Privateness Coverage Password Lock up

“DOWNLOAD THESE FILES”
Firmware Right here –>Lenovo A5000
VCOM Motive force –>VCOM Manual
Choice Motive force –> AutoInstaller
SPFlashTool –> LatestVersion


“Use WinRar or 7zip to extract the firmware”
“Extract the information for your preferred folder”
“In case you come across mistakes in flashtool, use other model of it.”


“I recommend to make use of 32bit Home windows OS for compatibility of the driving force”
“You’ll be able to additionally use 64bit model, simply disable motive force signing or motive force signature prior to putting in the driving force.”



Putting in Motive force with AutoInstaller


First check out the Choice Motive force, that is theAutoInstaller. Simply open the set up.exe then it is going to routinely set up the driving force. To completely test if the driving force is as it should be put in on your pc.
Apply those steps:

1. Flip off your telephone (all the time powered off is a will have to)
2. Press and cling quantity up or down, or you’ll be able to easy press the 2 button.
3. Insert your USB cable with out freeing the VOLUME button(s).
4. On your pc, it will have to stumble on your telephone and it is going to set up the MTK Preloader or Mediatek USB VCOM motive force.
5. Repeat 1 to four if it does now not come across your telephone.
6. If MTK Preloader/Mediatek USB VCOM Motive force is put in you’re just right to head in flashing your telephone ^_^

Reference Video the use of Motive force Car Installer (watch in HD)




Putting in Manually the use of VCOM Motive force




While putting in it manually your telephone will have to be became off, then attach it on your pc/pc whilst urgent VOLUME UP or VOLUME DOWN. This may increasingly come across and search for the driving force.


http://3.bp.blogspot.com/-klIAv5lc6Ps/VCJwYdw5GgI/AAAAAAAAAhc/H3OcBaAU5cU/s1600/next.JPG

1. That is the primary time that you are going to attach your telephone and it’s going to seek for the right kind motive force.
http://1.bp.blogspot.com/-maOHt_fn82g/VCJwXTgZsKI/AAAAAAAAAhM/nj2GIIYFjxQ/s1600/driver.JPG
2. Test come with this region … … and click on on browse. Search for USB VCOM Motive force and Click on on 2K_XP_COM folder in case you are the use of Home windows XP or Win7 for Home windows 7 after which press OK if you find yourself performed choosing the right folder for the driving force.
http://4.bp.blogspot.com/-LAB8eiU_JsI/VCJwXvNWOtI/AAAAAAAAAhQ/-mK78UVQRLg/s1600/driver2dacom.JPG
3. If the driving force is effectively put in MediaTek DA USB VCOM will seem within the New Hardware Wizard.


Video Putting in VCOM Motive force (please watch in HD)





“Your Telephone will have to be became off if you end up in a position to glue and flash your telephone”




http://padsdel.cdnads.com/www/images/2feb4d1923fea918a44b349937af00a6.png
http://go.padsdel.com/lg.php?bannerid=680020&campaignid=231313&zoneid=328313&loc=http://www.frogoff.com/lenovo-a5000-firmwarestock-rom-to-unbrick-your-phone/&cb=4325654cfb
Flashing

1. Release FlashTool (flash_tool.exe)
2. In Flashtool, Click on on Scatter-Loading, and cargo your scatter document. (see instance beneath)
http://1.bp.blogspot.com/-pWYsv9gxEWg/VL9xr1q0ciI/AAAAAAAAAy0/8kDzsYePbHM/s1600/ScatterLoading1.jpg
Reference Video The use of FlashTool model five.xxx (watch in HD)



3. When you load the document, UNCHECK PRELOADER and DSP best (By no means flash preloader and DSP if to be had in firmware) If you’ll be able to’t continue flashing with out those information then continue at your personal possibility, pressPress Obtain to Flash your Telephone.

http://1.bp.blogspot.com/-lM1Z53n5cFU/VL9xrW_Mw8I/AAAAAAAAAy4/LL7TbZ0zV_c/s1600/ScatterDoneLoadingFlash.jpg


four. When you press Obtain Apply those steps

• Flip off your telephone (all the time powered off is a will have to)
• Press and HOLD quantity UP or Downor you’ll be able to merely press it concurrently
• Insert your USB cable with out freeing the VOLUME button(s).
• Stay on repeating till Flashtool detected your telephone.

five. If effectively detected simply wait till the growth bar reaches one hundred%. In case your telephone didn’t routinely activate after flashing, eliminate battery and USB cable. And placed again your battery then flip in your software.



“Exhausting reset your telephone after flashing”



A few workarounds:


For those who come upon PMT_Changed errors here’s what you do:
In Recent model of Flashtool

1. PMT_CHANGED errors happen while firmware isn’t suitable together with your telephone. From time to time your telephone has a special board model. You will have to test it too, in case your firmware is suitable together with your telephone.
2. Check out Firmware improve
3. Check out other model of flashtool
4. Attempt to set Layout All + Obtain
5. Or check out Guide Layout first then Obtain.

When you come across Privateness Coverage Password:

1. Open flash_tool.exe
2. Load the scatter document
3. Goto Layout Tab
4. Click on on Layout excluding bootloader
5. Press Play/Get started Icon
6. Then dispose of battery
7. Insert the battery once more
8. Insert the USB cable (you will have to listen a beep for your pc, and it will have to continue in formatting.)
9. After performed formatting continue in Flashing.
10. Goto Obtain tab (I guess that you simply loaded the scatter record already)
11. Uncheck PRELOADER (this is essential)
12. Press Obtain
13. Then do away with battery
14. Insert Battery once more
15. Insert the USB cable (you will have to listen a beep for your pc, and it will have to continue in flashing or downloading the firmware for your telephone.)
16. Energy ON the telephone after flashing.
17. Repair your IMEI.

For Invalid IMEI (Does now not paintings in MT6571 SoC):

1. Root your telephone by means of vRoot/iRoot/Kingoroot or your most well-liked approach in rooting you tool. Your telephone will have to be rooted first.
2. Obtain MTKDroidsTool model 2.four.8 and model 2.five.3
3. Allow your USB debugging in Developer Choice (you additionally want this in rooting your telephone by the use of PC)
4. K on your PC — Open MTKDroidstool model 2.four.8 (Mtkdroidstool.exe) first. Just remember to hooked up your telephone already.
5. Nonetheless in Mtkdroidstool — Click on ROOT
6. For your telephone — A pop up discussion will seem, simply supply or permit it.
7. On your PC — If root shell is granted/allowed, Click on in IMEI/NVRAM tab. Whether it is grayed out that is the time while you open the MTKDroidsTool model 2.five.3.
8. Input your unique IMEI
9. Click on Exchange
10. Reboot your telephone

FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your telephone will have to be rooted first)


1. Remember to have MTKDROIDSTOOL model 2.four.8 or model 2.five.3 (you’ll be able to seek it in google)
2. In MTKDroidstool (I guess you release the software) — Click on in Root.
3. For your software — When you press Root, you wish to have to authorize it. A pop up message will seem. Click on Permit/Authorize is determined by your root software.
four. In MTKDroidsTool — Click on in IMEI/NVRAM, then click on in RESTORE.
five. Then search for the folder the place you extracted the NVRAM information.
6. Test if the Baseband is fastened. And if the IMEI is absolutely restored.
7. If Baseband continues to be Unknown and IMEI is invalid. Then you wish to have to arduous reset first your telephone.
8. After arduous reset your baseband will have to be fastened already. (base on my revel in)
nine. In case your baseband is fastened every now and then the IMEI continues to be invalid. So you wish to have to revive the IMEI.
10. To revive IMEI apply Step 1-four, however you will have to now not repair. You will have to fill the IMEI then click on REPLACE. Then reboot your telephone. VOILA! I am hoping the telephone is absolutely running http://www.frogoff.com/wp-includes/images/smilies/simple-smile.png

}