Diễn đànĐiện tử tiêu dùng

Unlock iPhone BL 3.9 ver 1.1.3 (cần Wifi) Tested worked 100%

ke_da_tinh171717
12/2/2008 0:44Phản hồi: 70
Update, Unlock Firmware...tested, Worked 100% And Updating....

HOT: UPDATE 5!!! UPDATE 5!!! UPDATE 1.1.4 AND 1.1.2>>1.1.4 OTB UNLOCKED!!!!

CÁCH NÀY GIÚP BẠN UNLOCK 100% LUÔN,MÁY ỔN ĐỊNH HƠN, TỐN ÍT THỜI GIAN HƠN. TỪ BƯỚC (III) ÁP DỤNG ĐƯỢC CHO MÁY 1.1.2>>1.1.4 OTB NHÉ.

Yêu cầu: Nếu máy bạn có Bootloader 3.9 (FW 1.1.1 OTB trở về trước), hoặc BL 4.6 đã hạ xuống 3.9 thì re-virgin lại nhé, nếu máy 1.1.2 hoặc 1.1.3 OTB (ĐÃ UPDATE HOẶC UNLOCK HADWARE) thì theo từ bước (III), MÁY 1.1.2>>1.1.4 OTB (MỚI BUNG HỘP) LÀM THẲNG BƯỚC IV. (LUÔN LUÔN NHỚ SET iPhone AUTO LOCK NEVER, MÁY PC PHẢI BẮT BUỘC CÓ SẴN JAVA, NET FRAMEWORK)

-Down iTunes 7.5 tại đây:

http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iTunes7/Win/061-3902.20071105.G6edS/iTunes75Setup.exe
-Down Net Framework tại đây:
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en
-Down Java tại đây:
http://www.java.com/en/download/windows_manual.jsp (down bản 13.9MB nhé)
-Down FW 1.1.1 Tại Đây:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-3883.20070927.In76t/iPhone1,1_1.1.1_3A109a_Restore.ipsw
-Down FW 1.1.3 Tại Đây:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-4061.20080115.4Fvn7/iPhone1,1_1.1.3_4A93_Restore.ipsw
-Down FW 1.1.4 Tại Đây:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-4313.20080226.Sw39i/iPhone1,1_1.1.4_4A102_Restore.ipsw
-Down Ziphone 2.5 Tại Đây:
http://kosovar.flatgard.net/findme/ZiPhoneWin-2.5c.exe

Cách làm như sau:

Quảng cáo



I.- Bạn ở FW 1.1.1 hoặc 1.0.2:
*Cài BSD Subsystem
*Vào Installer add Source: i.unlock.no
***Vào phần Installer>>Unlocking Tools>>The Virginizer>>Chạy nó để Virgin lại iPhone.

II.- Bạn ở FW 1.1.2:
*Downgrade về lại 1.1.1
*jailbreak, cài BSD Subsystem vào Installer add Source: i.unlock.no
*Vào>>Unlocking Tools>>Chạy Baseband Dowgrader>>xong restart lại iPhone.
*Làm các bước như hướng dẫn (I) bắt đầu từ (***)

Quảng cáo


III.-Tiến hành RESTORE 1.1.3 (HOẶC 1.1.4) lấy Baseband (TIẾN HÀNH VỚI FW 1.1.1 TRỞ XUỐNG VÀ 1.1.2 OTB, 1.1.3 OTB UPDATE HOẶC ĐÃ UNLOCK TRƯỚC ĐÓ):
*Sau khi xong các bước trên (I) Bạn RÚT SIM RA KHỎI iPhone, restore lại FW 1.1.3 (HOẶC 1.1.4) đã down lấy BaseBand.
*Bấm giữ đồng thời Power/Sleep+Home cho đến khi nào máy hiện ra dây cáp và biểu tượng iTunes, Restore lại iPhone với FW 1.1.3 (HOẶC 1.1.4).

IV.-jailbreak và unlock UPDATE TỪ v1.1.2>>1.1.4 với Ziphone 2.5 (hoặc 1.1.2>>1.1.4 OTB VỪA BUNG HỘP)
*Chạy Ziphone 2.5, tắt iPhone, sau đó mở lại, nhấn đồng thời Power/Sleep+Home khi thấy dây cáp và biểu tượng iTunes. khi iTunes nhận iPhone và bắt restore thì CHẠY DO IT ALL!!!
*Sau khi Xong thì cài BSD Subsystem 2.1
*Bước cuối cùng là cài lại Open SSH và...để sim vào nào.
*FIX LỖI:
Bạn vào phần này , xin phép bạn donkihote123 cho phép mình up nhé,
bạn đã hướng dẫn fix chi tiết rồi:

1A - làm từ bước : "Ra ngoài vào lại installer cho lành: add các source sau: (NẾU CHỈ LÊN 1.1.3)"
http://tinhte.com/forum/showthread.php?t=35746

1B - UPDATE LÊN 1.1.4 THÌ LÀM THÊM BƯỚC NÀY TRƯỚC RỒI MỚI LÀM (1A) :copy files SystemVersion.plist ra edit lại thành 1.1.3 rồi copy vô lại,tiếp tục installer soft của 1.1.3.! :http://tinhte.com/forum/showthread.php?t=39134&page=4

LÀM BƯỚC (1B) RỒI (1A) CHO MÁY LÊN 1.1.4, LÊN 1.1.3 CHỈ LÀM BƯỚC (1A)

UPDATE: Đã test lại trên máy mình một lần nữa, ok 100%
TESTED THÀNH CÔNG TRÊN 1.1.3 OTB!!!!


Chúc các bạn thành công.
BẠN NÊN SỬ DỤNG iTunes 7.5 LÀM ĐỂ CHO KẾT QUẢ TỐT NHẤT.
70 bình luận
Chia sẻ

Bài nổi bật

Xu hướng

atula186
GÀ
17 năm
Để tối về e thử xem! Thank bác!
jagiya
GÀ
17 năm
Anh ơi cho em hỏi bootload là gì vậy ạ, làm thế nào để phân biệt bootloader loại nào lại loại nào ạ, em cám ơn nhiều
ke_da_tinh171717
GÀ
17 năm
Bootloader là phần mềm load file khởi động hệ điều hành của iPhone, Bạn dùng winSCP chép file này vào Application trên iPhone, Set permission 0755 cho tất cả Folder và file trong BBinfo.app, restart lại iPhone và chạy BBinfo để biết được Bootloader của máy mình nhé. Chúc vui.
7101981
TÍCH CỰC
17 năm

ban oi,minh khong cach nao íntall cai weDict dc,dung ibrick cung khong íntall dc bat cu fanmem nao ,bac co cach nao fix loi nay khong? minh dang dng fw 1.1.3
ke_da_tinh171717
GÀ
17 năm
Bạn dùng winSCP nhé, vì lên 1.1.3 dùng winscp sẽ cài phần mềm ok hơn.
dung_tinhte
ĐẠI BÀNG
17 năm
Tui đã làm theo phương pháp này và thành công gùi, hi !!! Ai gặp vấn đề gì có thể trao đổi nhé .
danhtran90
GÀ
17 năm
iphone cu em la 1.1.2 da down xuong 1.1.1 va jailbreak roi da cai okotpre roi va up len 1.1.2 xong nhung khi press jailbreak thi no cu noi la ko connect duoc voi iphone/ipod xin cac bac giup
7101981
TÍCH CỰC
17 năm
ben canh nut jailbrek co cai reboot,nhan vao do roi doi no doc khoang 20 giay,sau do dong file bat do lai,mo them lan nua roi jailbreak la ok ngay
boybest00
GÀ
17 năm
có ai nghiên cuu dịch dùm mình với ko hiểu lắm
Unlock your iPhone for free!
This website contains lots of information and tutorials about how to unlock and get the most out of your iPhone. Thanks to Iphone Dev team, elite team, Installer.app team, geohot and all others involved in the iPhone hacking scene!


Latest news:
11.02.08: Ultrasimple 1.1.2/1.1.3 unlock released!
Things are really happening these days! With the release of "ZiPhone" you can jailbreak, activate and unlock a brand new phone in just 3 minutes. No need to downgrade to 1.1.1 first!

ZiPhone in it's original version is available here: Zibri's blog

I made a graphical user interface for easier operation, and better descriptions - click picture to download!


Mirrors: MegaUpload | RapidShare
Problems, tips for improvements etc. can be posted here

1.1.2 and 1.1.3 OTB software unlock released by George Hotz!
8th Feb 2008: Yes, he did it. Now you can unlock your brand new iPhone very easy. I set up an Installer script to make it even easier. In short terms, downgrade your phone to 1.1.1 and jailbreak as described below. After you have access to the phone, open Installer and goto Unlocking Tools and Install 1.1.2/1.1.3 OTB Unlocker. When it completes, you must upgrade to 1.1.2. Click the following link for full details:

Click here for 1.1.2 and 1.1.3 software unlock tutorial!
New and better 1.1.1 jailbreak method
I've released a tweaked version of jailbreakme.com's jailbreak method. To use it, just use i.unlock.no as URL instead of jailbreakme.com when you are about to jailbreak your 1.1.1 phone. More details here.

Status on 1.1.3 jailbreak
1.1.3 was released on January 15th. There's two jailbreak solutions released. The "offical" jailbreak can be downloaded here. The other one was "unofficially" released by NateTrue, but reports tells that there are some issues with it. DON'T upgrade to 1.1.3 using iTunes! 1.1.3 secpack is found, so if you accidently upgraded your OTB 1.1.1 or older it is possible to downgrade.

Info about "out of the box" 1.1.2 unlocking and bootloader downgrading
It's now possible to downgrade the bootloader on out of the box 1.1.2 which has bootloader v4.6. This means that it's also possible to unlock these phones after they are downgraded. To downgrade you will need to use testpoints, meaning the phone needs to be disassembled.

How to unlock OTB 1.1.2 with testpoints tutorial here (old, read news above)
Info about 1.1.2
If you bought a phone that had 1.1.2 preinstalled (it shows a picture of a cable and the iTunes icon), the phone have a new bootloader preventing an easy unlock. It is now possible to downgrade the bootloader, but it requires disassembly and testpoint. Tutorial available here!

Info about virginizing and upgrading old unlocked iPhones
If you have an unlocked 1.0.2 iPhone, or upgraded to 1.1.1 and have "damaged" imei (0049) you need to repair your phone. I have now put together the ultimate repair solution - this is the absolutely easiest way to repair the phones (virginize). To do so, just add http://i.unlock.no/ as a Source in Installer, make sure BSD Subsystem is installed (else it's in the System category) and install The Virginizer found in the Unlocking Tools category. Click here for more details about virginizing. And remember, you got it here first!




--------------------------------------------------------------------------------

How to jailbreak, activate and unlock iPhone with 1.1.1
This tutorial assumes that your iPhone has firmware version 1.1.1. If you are unsure, here is how to check: On the emergency dial screen dial *3001#12345#* and tap Versions. Firware version should be 04.01.13_G. If it's 03.14.08_G you have v1.0.2 and need to update it to 1.1.1 first. Read here first if you previously unlocked your phone.

Bypass activation and prepare phone for software installation
Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).
On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
Answer the call, and tap on Hold
Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
Your contact now has two "web pages" - tap on the first one (prefs😃. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no
Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
Phone will return to activation screen and after a few seconds the phone should restart.
If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)
Click here if you want to upgrade to 1.1.2 or 1.1.3
Unlock the SIM-lock on jailbroken 1.1.1
Open installer, and install the update if prompted.
Go to sources and tap Edit and Add
Add this URL: http://i.unlock.no
Tap Done and then Refresh
Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
The unlocking process will take about 5-10 minutes, in the end it should say it was successful!
To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.
Congratulations, you are done!
How to jailbreak 1.1.2 or 1.1.3.
Regardless of whether you want to use 1.1.2 or 1.1.3 firmware, you must start with a jailbroken 1.1.1. Downgrade instructions are available here and Jailbreak for 1.1.1 here. When done continue reading here. Note: even if you want to use 1.1.3, you need to upgrade to and jailbreak 1.1.2 first. You should also unlock your 1.1.2 before upgrading.

Upgrading to 1.1.2
On a 1.1.1 phone, open Installer and install OktoPrep located in the Tweaks 1.1.1 category.
Download the 1.1.2 firmware file from Apple: iPhone1,1_1.1.2_3B48b_Restore.ipsw (right click link and save target)
Connect your phone to your computer and open iTunes on the "summary" page.
Hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the firmware file you downloaded in the previous step.
While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.
If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup
When your phone is done upgrading, and shows the Slide for emergency screen, you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.
An application should appear, with a "Jailbreak" button - click on it and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.
Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.
If are going to use TurboSIM or a similar SIM-adapter you don't need to unlock - it should work right away. If your phone did not have 1.1.2 when you bought it (old bootloader), you can unlock it to work with any sim-card. To do so, install anySIM 1.2.1u located in Utilities category. Open Settings enable Airplane Mode (very important!) (and set Auto lock to never if you haven't already) and then you can launch anySIM and follow the instructions shown.

Important: 1.1.2 has a bug that causes phone/SMS to crash when used in foreign countries. To fix this, you must Install and run iWorld found in the Tweaks (1.1.2) in Installer. Run the application and select your country. When phone has rebooted you can uninstall iWorld.

Upgrading to 1.1.3
This requires that you already have jailbroken 1.1.2. Open Installer, and Install Official 1.1.3 Upgrader found in the System category. This will download the entire 165MB firmware over Wi-Fi, patch it, and upgrade your phone automaticly. So it may take some time - normally 10-30 minutes. When done your phone should reboot directly to a jailbroken 1.1.3 firmware.





--------------------------------------------------------------------------------


--------------------------------------------------------------------------------

A few tweaks
[1.1.1] If you want to enable the International menu, install Enable International menu which is found in the Unlocking Tools category. This will let you choose keyboards, and set your phone to use your prefered regional settings, like date and phone number formatting. Be alerted though - it looks like Apple haven't finished this feature completely yet (which is probably why it's deactivated) so there may be some issues. In my case Fahrenheit and Celsius is mixed up in the Weather application for instance!
[1.1.1] By default, the EDGE settings found in Settings → General → Network → EDGE are not saved when phone is restarted. To fix this, install EDGE Settings fix which is found in the Unlocking Tools category..
If YouTube does not work ("You must first connect to iTunes..."), try to install YouTube activation which is found in the Unlocking Tools category. Also make sure that the phone has correct date.
If you for some reason need to deliver your phone to Apple (service etc.), i recommend that you revert the unlock first so that they (hopefully) can't see it's been unlocked. Install OneSIM which is found in the Unlocking Tools category, and tap on the new icon it creates to run it. After you are done, do a restore in iTunes.
Frequently asked questions and problems
Nothing happens after i visit jailbreakme.com
Make sure your phone is connected to the computer. Try to use i.unlock.no instead of jailbreakme.com.

How can i upgrade a new unactivated phone?
Just put it in recovery mode, and it will automatically restore to the latest firmware. It might be safer to manually download and select the 1.1.1 firmware.

How do i upgrade, downgrade or restore the phone firmware?
To enter recovery mode, connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously. After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button. After about 15 seconds the computer and iTunes will detect the phone in recovery mode, and you can perform a restore. IMPORTANT: If you just click the restore button, it will restore it with the latest firmware. It's much safer to manually select firmware instead. If you want to manually select a different firmware you can hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button, and it will let you choose firmware file. Download the wanted firmware here (you would normally want 1.1.1).

Note: If you downgrade the firmware you will get an error when restore is complete, and phone will be stuck in recovery mode. To get it into normal mode, run AppTapInstaller.exe (or iNdependence if your're on a Mac).

My phone is already unlocked - can i update to 1.1.1?
Not straight away! The old unlock software's (before anySIM 1.1, except iphonesimfree.com's software) had serious flaws, making the phone unusable in later firmware. Before you update your phone you will need to repair your phone by "virginizing" the phone (baseband) firmware. Below are the ultrasimple instructions

How to "Virginize" the iPhone to repair the baseband?
Ignore all long and complex tutorials - I have set up a fully automatic script that will repair the baseband. This script will work on any baseband version, but will not work on phones with new bootloader (out of the box 1.1.2). It will not run on 1.1.2 firmware either, you need to downgrade to 1.1.1 or 1.0.x before running.

You would want to virginize if you upgraded to 1.1.1, and have 0049xxx IMEI. Check this in Settings → General → About.

Virginize instructions:
Set Settings → General → Auto Lock → Never
Start Installer and update it if it asks. Tap on Sources, Edit, and Add http://i.unlock.no/ as a repository.
Make sure you have BSD Subsystem installed. If it's installed it's listed in "Uninstall", if not listed, tap on Install and goto the System category and install it.
Now, install The Virginizer found in the Unlocking Tools category. This will take almost 10 minutes to complete.
When done, restore your phone to get 1.1.1 firmware reinstalled (this is not necessary if you are going to upgrade to 1.1.2)
When phone has been restored, you can Activate and unlock as normal.
How do i downgrade a 1.1.2 or 1.1.3 phone?
Downgrade the main firmware:
Connect the phone to the computer and launch iTunes (v7.6 NOT recommended).
Restore your phone like explained in details here.
You will get an error when restore is complete, just ignore it and run AppTapInstaller.exe (to Mac users: iNdependence should do the same.
AppTapInstaller.exe will fail, but your phone will get to the Activation Screen now!
When on the activation screen, just follow my tutorial to jailbreak and bypass activation
Now your phone main firmware is ok, but to get the phone part working properly you should also downgrade your baseband firmware. At the moment this is NOT possible if your phone already had 1.1.2 or 1.1.3 when you bought it (meaning it has the new bootloader). If you accidentally upgraded your phone to 1.1.2 or 1.1.3 and want to go back to 1.0.2 or 1.1.1, read on.

Downgrade the baseband firmware:

Set Settings → General → Auto Lock → Never
Start Installer and install BSD SubSystem found in System Category.
Go to Sources and tap edit and add http://i.unlock.no/
Now install "Baseband Downgrader" found in Unlocking Tools category. This will take around 5 minutes.
When done, restore your phone to get 1.1.1 firmware reinstalled.
When phone have been restored, you can Activate and unlock as normal.
Can't find AnySIM - Unlocking Tools category is missing
Please follow the tutorial carefully - it will show up after you add my repository (http://i.unlock.no) and tap refresh.

YouTube is not working
If YouTube does not work ("You must first connect to iTunes..."), try to install YouTube activation which is found in the Unlocking tools-category after you have added my repository (see previous question)

Is the unlock permanent? Can i restore my phone or upgrade it?
This unlock method is based on a firmware patch, so everytime the baseband firmware is flashed, the unlock will not work anymore. You should be able to restore without loosing the unlock, and you should also be able to upgrade to future firmwares as long as the baseband firmware is not updated, but never perform a software update before you have specifically read that updating is safe.

Where can i find the iPhone firmware files?
1.0.0: iPhone1,1_1.0_1A543a_Restore.ipsw
1.0.1: iPhone1,1_1.0.1_1C25_Restore.ipsw
1.0.2: iPhone1,1_1.0.2_1C28_Restore.ipsw
1.1.1: iPhone1,1_1.1.1_3A109a_Restore.ipsw
1.1.2: iPhone1,1_1.1.2_3B48b_Restore.ipsw
1.1.3: iPhone1,1_1.1.3_4A93_Restore.ipsw
Tips and tricks
Some of these tricks require computer skills. Don't ask me for help.

SMS recieved from internet is scrambled/not working?
For some ridiculous reason, Apple did not add real support for the SMS standard. The result is that SMS sent with a alphanumeric/non standard number will either not be recieved at all or the text will get scrambled as shown on the screenshot below. This bug may even damage the SMS database on your phone. It took Apple some time, but in 1.1.2 it's finally fixed, so we can just use the phone application from 1.1.2 on 1.1.1 (1.0.2 or older is not supported currently). Thanks to saraf_suman for telling me that.


How to fix the SMS problem easily:
Open installer, and tap Sources, Edit and Add.
Type in http://i.unlock.no/ and Ok then Done.
Now tap on Install at the bottom and scroll down to the Unlocking Tools category
Install SMS Fix
When done installing, reboot your phone and it should work
Note: I have not throughly tested this, so there may be side effects i'm not aware of yet. But you can just uninstall the package to revert the changes. I only tested on 1.1.1.

Sometimes the phone displays the phone numbers instead of the names?
There's a bug in the iPhone software that will cause problems with detecting the numbers stored in your contacts, if iPhone is used outside the supported countries. I have set up a fully automatic fix for this (thanks to Dev team for patched files), that will fix this problem.

Start Installer and install the package called Phone # to name fix located in the Unlocking Tools category (i.unlock.no must be added as a Source to see this category).

Configuring EDGE settings (internet)?
If you have firmware 1.01 or later you can go to Settings → General → Network → EDGE to configure EDGE. Check your provider's website for settings.

Note for 1.1.1 users: For some reason v1.1.1 firmware will not save the settings after reboot. I have added a little fix, which is available in my repository for Installer.app: http://i.unlock.no/ - descriptions on adding my repository is here (step 1-4)

Changing phone number formating: (123) 456-7890
Formatting is stored in:

/System/Library/Frameworks/AddressBookUI.framework/ABPhoneFormats.plistDownload this file from your phone. The file is stored in binary format, so you'll need to convert it to text. Now save this file and open it in a text editor. Change the formatting under us to look like you want (if you find your region in the file, just copy from your region to the us). There's probably some way to just make it use your language (instead of 'us'), but i don't know where you specify that. When you are done changing formatting, save the file and upload it to the iphone in same directory you found it. You don't need to convert i back to binary.

Update for 1.1.1 users: In previous versions locale settings did not apply to number formatting. I noticed that in 1.1.1 it does, so it's better to change the phone's locale configuration instead of changing the formatting manually. Install "Enable International Menu" found in the Unlocking Tools category.

Making the carrier name/logo fit without scrolling
Apple left a rather small space for operator name, so if it's above 7(?) characters, it will scroll, and display only first part (click picture at right). I found a way to decrease the font size, making it fit.

Load the following file in a Hex editor:

System/Library/CoreServices/SpringBoard.app/SpringBoardFont size should be at offset 7C176. In HxD, just click "Search → Goto" and set offset to 7C176 as shown in picture below. If the font size is not at this offset in your file, you can try a text string search for loopOperatorToBeginning, it should be right above that.


As you can see, you can also change the font type, and color of the text. Default is size 14. Changing it to 11 or 12 should do.

Update: Here is a way to set a permanent carrier logo. I have created a few logos for norwegian users (screenshot below): Telenor, Netcom, Tele2, Chess, OneCall. Download here. Remember that you will need to change pictures manually if you switch carrier.


Disabling autocorrection when typing on keyboard
Read here until i write a more detailed way.

Adding international characters on the keyboard?
Read here until i write a more detailed way.

Unlock.no's version of jailbreakme.com
I've studied how jailbreakme.com jailbreaks the phone etc, and i noticed that jailbreakme.com copies a 736KB archive with the needed files (136KB), but the other 600KB is just CRAP (hidden mac files, sourcecode etc). So i decided to tweak the solution a little.

I have removed all the "crap" jailbreakeme.com serves, so my archive is only 136KB, but still have ALL relevant files. This will make it much faster and more stable, since the file transfer is reduced by 600KB!
Latest version of Installer (b10) is installed, and also latest version of Community Sources (modmyifone repository) - i will try to keep these packages updated at all times, so that you don't need to update anything after jailbreaking.
http://i.unlock.no/ is addded as a (trusted) source in Installer, so that you have quick access to common tools like "Baseband downgrader" (reflashing baseband to 1.0.2 baseband) and "bootloader downgrade" package (Unlocking Tools category).
To jailbreak using this method, instead of adding URL jailbreakme.com, you add url: i.unlock.no (http:// not necessary) to the contact you create after dialing *#301# etc. Have your phone docked to the computer when visiting the jailbreak page! I have no idea why, but sometimes it doesn't work if your phone is not docked (this applies to jailbreakme.com as well).

Note: Jailbreaking using this method will add i.unlock.no as a trusted source. If you don't trust this Installer source, don't do this.

I did not develope this solution myself. I use jailbreakme.com's solution, and just tweaked it. All credits/donations goes to everyone who worked on this solution: http://jailbreakme.com

My comments about the iPhone unlocking solutions
I've been unlocking cell phones for more than 5 years, and even though i don't develope the solutions myself, i know pretty much how it works - and iPhone does not appear to be different from others, except for the fact that it needs activation in addition to unlocking.

There are two types of unlocking: "Firmware-patch" and "Direct unlock"
Firmware patch is simply patching the firmware in order to bypass the unlock. Phone is still "locked", firmware is just tricked into believing it's not. An example would be when phone startsup and runs code "if(phoneIsLocked == false) doStartphone();" - a patch would simply change "false" to "true", causing it to run doStatphone() even when it's locked. If firmware is upgraded/restored, this patch will of course be removed and were back to start again. This type is in the industry considered as a semi-unlock, and only accepted as a last resort if no other way is found (usually, it's just a temporary solution)
Direct-unlock is the real way of unlocking phones. Usually it involves just rebuilding the entire lockdata in EEPROM with "blank" unlocked data. Or the safest way is to get the phone itself to clear the data by making it unlock itself - which could be achieved by for example finding the unlock codes and feed it with them. This would leave absolutely no trace of "hacking" - it will be 100% correctly done, as intended by the manufacturer.
(SIM-cloning/Turbosim is not mentioned, because that's not considered unlocking.)
When a phone is unlocked (in a proper way), it will always be unlocked. Firmware upgrades never touches EEPROM, including lock data.

Here are my thought's on how iphone unlocking works - of course, it's just my thoughts based on my experience with other phones, and i may very well be wrong.

IPFS unlock solution is permanent, and will handle all future updates Yes, i'm fairly sure that a phone unlocked with IPFS is a proper unlock (not firmware patch), making it permanent. But of course, unlike other's, iphone needs activation and IPFS therefore completely dependent on activation, which is depending on jailbreak. But when it comes to the operator lock itself, IPFS's permanently unlocks it.

I'm not sure exactly how IPFS does unlock it, but i'm feeling very sure it's one of these:

1. IPFS reads data from the baseband/EEPROM, and rebuilds the lock area in EEPROM with proper data - without any lock. This is exactly the same done on almost all other phones.

2. IPFS patches the baseband, but only as a temporary step in order to achive the above. When it's finished, it doesn't matter if the patch is removed (bb upgraded), because phone is already unlocked.

AnySIM and the other solutions are fimware patch solutions and will never survive baseband flashing/upgrade. Unlike IPFS (if IPFS also patches firmware), AnySIM patches firmware in order to bypass the lock, not in order to unlock it - or at least it's not unlocking it properly. The fact that anysim unlocked phones are bricked after upgrading, must be caused by changes the anySIM solution does to EEPROM, which is not properly done, and makes it "corrupted" as seen from the new firmware.

In my opinion there's no reason to be so negative about IPFS. They did the real unlock and so far noone have been able to recreate their solution. So don't expect a free real solution for 1.1.1 appearing very soon either. A free patch-unlock though is probably already possible now that they have decrypted the ramdisk, i will try that tomorrow. Of course iphone dev team are doing the most important work, and let's hope they soon will be able to work out a direct unlock solution as well.

Feel free to correct me, i already mentioned this is just how i think itworks. (comments can be posted
boybest00
GÀ
17 năm
How to unlock any new iPhone - OTB 1.1.2 and 1.1.3
Update: A new and better unlock method is now available. Check the frontpage
This method is developed by George Hotz, as you can see in his blog. You can send him a donation by paypal to [email protected].

Works on any phone that shown this image first time you started it (meaning it had 1.1.2/3 and bootloader 4.6). If your phone had a picture of the earth when you started it first time, follow instructions here instead. If you have questions, ask them in the Hackint0sh forum.

Step 1: Install 1.1.1 firmware
Even though the unlock script can be installed from any firmware, i strongly recommend you to run it from 1.1.1. If you want to install it from any other firmware, just skip to Step 3.

To get 1.1.1 firmware installed, you must get the phone enter recovery mode. Here's how:

Connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously.
After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button.
After about 15 seconds the computer and iTunes will detect the phone in recovery mode.
Download the following two files to your computer if you havent alread: 1.1.1 firmware and 1.1.2 firmware
Hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button in iTunes, and it will let you choose firmware file. Select the 1.1.1 firmware file you downloaded in previous step.
iTunes will give give a 1015 error, and you phone will get stuck in recovery mode.
To get it into normal mode, Windows user can run AppTapInstaller.exe (select 1.0.2 firmware), or iBrickr, while Mac users can use iNdependence. In all cases, close/eject iPhone from iTunes before running these applications, and as soon as your phone have rebooted in normal mode you can close the applications and ignore any errors. If you are downgrading from 1.1.3 you might have problems getting it started in normal mode. The solution is simple, just restore your phone to 1.1.1 again, and this time it will work
Now your phone should be at the activation screen.
Step 2: Jailbreak and activate
Make sure you have a SIM-card with PIN turned off (the supplied AT&T card works fine).
On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
Answer the call, and tap on Hold
Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
Your contact now has two "web pages" - tap on the first one (prefs😃. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no
Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
Phone will return to activation screen and after a few seconds the phone should restart.
If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)
Step 3: Performing the unlock
Add http://i.unlock.no/ to Installer sources if you didn't follow this tutorial.

Tap on the Installer icon, and wait for it to refresh the sources
Tap on Install at the bottom
Scroll down to Unlocking Tools and install 1.1.2/1.1.3 OTB Unlock
The process will take a few minutes, before you get a message that it completed successfully
Step 4: Upgrade to 1.1.2
Even though the phone is already unlocked, it will not get a signal. To fix this upgrade to 1.1.2:

Open iTunes again and hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the 1.1.2 firmware file you downloaded previously.
While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.
If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup
If you previously had 1.1.3 on the phone, iTunes will fail again with error 1015 and the phone only shows a picture of a cable. If not, the phone will boot to the activation screen with "slide for emergency" text.
Now you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.
An application window should appear, with "Boot from recovery" and "Jailbreak" buttons. If you got an error in iTunes like explained above you need to click the "Boot from recovery" button first. When the phone shows the picture of a cable and "Slide for emergency" text, click on the "Jailbreak" button and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.
Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.
Step 5: Finishing the unlock
Now your phone will accept any SIM-card and you will get signal. Congratulations!

But if you are using your phone in a forreign country, the Phone/SMS application will just crash.

Open Installer and install iWorld found in the Tweaks 1.1.2 category. Start iWorld and select your country and it will fix the crashing problem.

If you want to upgrade to 1.1.3, there's a package called Official 1.1.3 Upgrader located in the System category. Installing it will upgrade your phone to a jailbroken 1.1.3. Be aware that it will take some time (25-40 minutes).

If you have questions, ask them in the Hackint0sh forum.
http://rapidshare.com/files/91245626/ZiPhoneGUI.exe.html
jagiya
GÀ
17 năm
Anh oi cam on vi da tra loi thac mac cua em, anh có thể cho em hỏi downgrade la lam zi không ạ, người ta nói downgrade xuống 1.1.1 là làm sao anh, chỉ cho em với
ke_da_tinh171717
GÀ
17 năm
Downgrade là hạ Firmware nó xuống (hạ phần mềm) chứ không hạ Modem Firmware (Baseband) đó bạn, vì hiện nay update các firmware mới hơn (muốn jailbreak hay active nó không qua at&t , T-mobile hay O2) đòi hỏi phải có những bước chuẩn bị từ firmware trước (ví dụ muốn lên 1.1.2 thì phải hạ 1.1.1>>cài oktoprep>>update lên 1.1.2>>jailbreak). Ngoài ra với những máy Bootloader 3.9 muốn hạ Modem Firmware thì nên hạ xuống Firmware thấp như 1.0.2 hay 1.1.1.
ke_da_tinh171717
GÀ
17 năm
TO boybest00: Mình đã tổng hợp các cách unlock và update trên các trang web, rồi chọn ra cách nào ổn định và thành công cao nhất, test thử vài lần rồi mới post 1 bài hướng dẫn này đó bạn. bạn hoàn toàn yên tâm vì tính cho đến lúc post bài này, mình đã đưa tổng cộng 4 em lên 1.1.3 rùi mà dùng ok đó. Theo đúng phương pháp mình post này. Chúc bạn thành công nhé.
atula186
GÀ
17 năm
*Jailbreak 1.1.2 xong thì, Update Installer, Community Source, cài BSD Subsytem, vào phần system chạy Official 1.1.3 Upgrader (khoảng 20-40 phút là xong)
Sao bước này e chạy lâu thế nhỉ?? Suốt mấy tiếng rồi mà chưa đc??
7101981
TÍCH CỰC
17 năm
em cai dc vao roi,nhung no chi hien icon ma chay kh dc,da doi qua 0755 luon roi,cha hieu sao kh vao dc wedict,cu vao roi lai thoat ra ngay,tim du cach roi ma van bo tay,bac thu xem cai dc weDict vao khong?co j chi em lai xem ntn bac nhe! tks bac
7101981
TÍCH CỰC
17 năm
xin lỗi mọi người vì mình quên không dùng tv có dấu
ke_da_tinh171717
GÀ
17 năm
Cái này tùy thuộc phần lớn vào tốc độ wifi của bạn, Lấu nhất là giai đoạn update lên 1.1.3 đó bạn. Chúc thành công nhé.
Bạn cài weDict từ Installer nhé, nhớ update Community source. Máy mình cài chạy bình thường mà, Có gì ko được mình sẽ gửi bạn weDict.app mình đang dùng. Cũng down từ Installer đó. Chúc vui.
kid08
ĐẠI BÀNG
17 năm
mình vẫn bị lỗi youtube mặc dù đã cài theo hướng dẫn hjz
ke_da_tinh171717
GÀ
17 năm
Bạn cài BSD Subsytem chưa? Sau đó sync với iTunes rồi hãy cài youtube activation nhé. Chúc thành công
kid08
ĐẠI BÀNG
17 năm
cũng không đc bạn ạ, mình cắm dây và vào itune xong cài, xong restart

vào youtube vẫn bị báo active :|
ke_da_tinh171717
GÀ
17 năm
Mình có một máy cũng đòi active Youtube, nhưng khi cài Youtube Activation thì ok ngay. Bạn thử làm lại bằng cách mình mới Update xem, Bạn hạ xuống FW 1.1.1, Đưa về DFU bằng iBrick, Jailbreak 1.1.1 và làm từ bước II xong đến I và III, IV nhé. Chúc thành công.
kid08
ĐẠI BÀNG
17 năm
Trưoc đây mình fix disk space bang cach tao thu muc ROOT_app bay h k thay nua vao application thi bao loi hjz,ban co file source cua installer k minh mat het source roi,sory dag tren ip go tv k dc
canary2012
GÀ
17 năm
cho mình hỏi chút
có thể bỏ qua bước này với iPhone 1.1.2 ko?
vì thực tế là sau khi upgrade qua iTunes với FW 1.1.2 thì cũng cho kết quả cái BB 04.03.13_G mà
và cái BBdowngrade thì phải nói là rất cẩn thận mới dc
ko thì lại no WIFI với BL.... thì chết
theo mình thì chỉ cần restore lại FW 1.1.2 trước khi update lên 1.1.3 là oke mà

nếu ko dc thì giải thích hộ mình cái nha
😁
thax
ke_da_tinh171717
GÀ
17 năm
Bạn ơi, upgrade 1.1.2 chỉ cho MF 04.02.13_G thui, cái cần là 04.03.13_G mà? Với lại cách mình hướng dẫn là bước an toàn vì re-virgin iPhone xong khi unlock sẽ tránh những rắc rối không cần thiết và unlock sẽ ok hơn, vả lại máy bạn có Bootloader 3.9 thì nên làm bước này để virgin.Chúc bạn thành công.
7101981
TÍCH CỰC
17 năm
van kh dc,cai wedict o cac sources roi ma khong dc,co icon nhung luc nhan vao no thoa ra ngay,da dung tat cac lenh chmod +x cung kh chay dc,bac xai 1.1.3 thi chep em cai file source trong may bac nhe! cai file ten la packagesources.plist ay! tks bac nhieu
atula186
GÀ
17 năm
VI.-jailbreak v1.1.3 với Ziphone và unlock với anySIM 1.1.3
*Unzip Ziphone 1.1, tắt iPhone, sau đó mở lại, nhấn đồng thời Power/Sleep+Home khi thấy dây cáp và biểu tượng iTunes. khi iTunes nhận iPhone và bắt restore thì mở Ziphone và chạy, đánh dấu vào Jailbreak và Active>>Nhấn Free my Iphone.
Mình làm đến bước này rồi mà sao vào set wifi nó chỉ nhận đc 1 lúc rồi lại mất nhỉ??

Xu hướng

Bài mới








    1. Tin mới
    2. Sản phẩm công nghệ mới
    3. Khuyến mãi
    4. Sự kiện
    5. Video

    1. Tinh tế

      1. Nội quy diễn đàn
      2. Thỏa thuận sử dụng dịch vụ
      3. Góp ý
      4. Hỗ trợ, hướng dẫn
      5. Liên hệ quảng cáo
      6. Tinh tế RSS

    2. Cộng đồng

      1. Điện thoại
      2. Máy tính
      3. Camera
      4. Xe
      5. Khoa học công nghệ

    3. Nhật Tảo

      1. Mua bán điện thoại
      2. Mua bán máy tính
      3. Mua bán máy tính bảng
      4. Mua bán camera
      5. Mua bán đồng hồ thông minh
      6. Mua bán xe
      7. Mua bán điện máy
      8. Mua bán sim, sim 3G

    4. Theo dõi chúng tôi

      1. Facebook
      2. Youtube
      3. Flickr
      4. Twitter
    • Chịu trách nhiệm nội dung: Trần Mạnh Hiệp
    • © 2025 Công ty Cổ phần MXH Tinh Tế
    • Địa chỉ: Số 70 Bà Huyện Thanh Quan, P. Võ Thị Sáu, Quận 3, TPHCM
    • Số điện thoại: 02822460095
    • MST: 0313255119
    • Giấy phép thiết lập MXH số 11/GP-BTTTT, Ký ngày: 08/01/2019