sau khi up xong bản ver RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship phim cảm ứng và tất cả chức năng đều ok duy chỉ có wifi không kích hoạt được, ai biết chỉ giáo dùm
thanks
Solution for Invalid Vendor ID and Invalid Model ID
DON´T DO THIS: WITH THIS PROCEDURE YOU KILL YOUR WI-FI.
I found a solution to this problems. Now you can update your Excalibur with any ROM, Radio, Spl, etc.
Download the attached file and follow the instructions.
1. Run the SDA Application Unlock.exe, it will greet you with "SDA successfully unlocked".
2. Turn off your Excalibur and remove the storage card.
3. Turn your Excalibur on and connect it to active sync/windows mobile device center.
4. From the Excalibur USPL- CID BYPASS run Uspl.bat. Follow the on screen step by step instructions. Press enter through the prompts which you have already completed in steps 1-3. On your Excalibur mobile you “may” be prompted to allow "itsutils" then "haret" to run, press yes both times... On running haret your screen will go black with the backlight on dim. Now go to active sync/windows mobile device center and disable usb connections. (note all going well the screen will remain in this black state until step 5 has completed).
5. Now run the update RUU_Excalibur... or HTC_S620... update you want flash, everything else is automated. You’re done!
6. Re-enable usb connections on active sync/windows mobile device center.
I test this procedure in a S621. TEST AT YOUR OWN RISK.
Thank you to pok and jockyw2001 for the CID BYPASS made for VOX.
Greetings from Argentina.
Ban up lai theo cách trên.Mình đã test cho con Dash, chạy ngon lành.Nhung thật ra chạy ko nhanh đáng kể so với Dash ROM nên mình quyết định cho nó về nguyên bản.